|
Our precision welding head for delicate welding tasks!
When combined with the SPATZH6000 Resistance Welding Control, the highly dynamic drive system enables short cycle times in automated production applications. The internal precision position measuring system and responsive control ensure excellent welding results... |
|
A new force sensor is available for the SPATZMulti04. The SK-360 allows a combined force and voltage measurement in welding guns as well as in miniature welding heads. The grip may be taken off for stationary installation... |
|
A new force sensor is available for the SPATZMulti04. The SK-010-WR allows a combined force and voltage measurement in welding guns as well as in miniature welding heads. The grip may be taken off for stationary installation... |
|
The SilverSPATZM800LL/M800LW weld timer and 1,000 Hz MFDC inverter is specially designed for applications in the automotive industry by reducing it's capabilities to the basic needs. In combination with an external MFDC transformer it is a cost efficient power supply for resistance welding for a welding current range of 3 kA to 30 kA. The SilverSPATZM800LL/M800LW weld timer and middle frequency inverter is housed in a compact IP20-protected housing for switch cabinet mounting... |
|
Ethernet- and PROFIBUS-DP-interface for even more flexibility!
The SPATZH300plus high-frequency inverter power source with its 20,000 Hz clock frequency is the all-purpose, cost-effective alternative to all of the transistor-controlled power supplies for micro welding and small component welding. With its rapid reaction speed, the SPATZH300plus displays high-performance, lasting welding capability, functioning with just as much precision at 100 A as it does at 9,000 A... |
|
The SilverSPATZHPA-H1 suspended cabinet is the optimal solution for
manual production, both from a technical and ergonomical point of view.
It is possible to connect the compact suspended cabinet with a manual trafo gun and/or a welding transformer with a capacity of up to 150 kVA. The control cable for the I/O signals from/to the welding gun is connected via the HAN24 socket which is integrated in the cabinet bottom. The main switch and all other display and operating elements are positioned in the casing bottom. These parts are thus easily accessible and ergonomical... |
| 
