|   Deutsch    |   Français 

  Products     Applications     Partners     News     Download     About Us     Contact  

SPATZ+H9000 High Frequency Inverter Power Source


- ETHERNET- and USB-Interface -

The SPATZ+H9000 high-frequency inverter power source with its 20,000 Hz clock frequency is the all-purpose, cost-effective alternative to all of the transistor-controlled power supplies for micro welding and small component welding. With its rapid reaction speed, the SPATZ+H9000 displays high-performance, lasting welding capability, functioning with just as much precision at 100 A as it does at 9,000 A.

Each welding operation is feedback controlled during the procedure. The control process takes place very quickly based on the 20 kHz inverter frequency. Actual values are compared with target values every 0.025 ms. The output power is adapted during the welding process if targets are not being met. Constant Current Control (CCC), Constant Power Control (CPC) and Constant Voltage Control (CVC) can all be used. At the end of each weld, the SPATZ+H9000 checks if the actual welding parameters are keeping within the limits set.

For the connection to our linear heads or PLC extension cards are available.

Online programming and analysis are the connecting links between production, quality control and process engineering. There are two different seperately sold software packages available.

SPATZStudio: Further detailed information is available for the maintenance via notebook and the USB-interface.

SPATZStudioNET: Integration and crosslinking of welding systems with a line PC by Ethernet with full online functionality.

Timer, power unit and special high-frequency transformer of the SPATZ+H9000 are housed in a compact IP54-protected housing, which weighs a total of 30 kg / 66 lb. The specific advantages of the SPATZ+H9000 high-frequency inverter, such as its low weight and high output voltage, allow the easy system integration.

Technical Data  
Type SPATZ+H9000
Number of programs 1024
Welding impulses / program 16
Control modes CCC, CPC,CVC
Weld parameter monitoring yes
Stepper function for CCC, CPC, CVC
Force schedule yes
Slope up / slope down yes
Signal inputs current, voltage, force, penetration
Output for proportional valve yes
Mains voltage U1 3~400 V-500 V, 50/60 Hz
Max. power Smax 60 kVA with 400 V
Nominal power SN 33 kVA with 50 % duty, 400 V
Welding current range I2 100 - 9,000 A with 6 % duty cycle
Welding voltage U2N 10 V DC
Interfaces USB, ETHERNET
Digital inputs 16
Digital outputs 11
Cooling water 4 l/min at 20 °C
1.1 gal(US)/min at 68 °F
Type of protection IP54
Dimensions (H x W x D) 380 x 430 x 210 mm
15.0 x 16.9 x 8.3 in
Weight 30 kg / 66 lb
Colour light grey / RAL7035
Included in delivery documentation

 

SPATZ+H9000 Enabling Scheme: