SPATZH6000plus High Frequency Inverter Power Source
- Ethernet- and PROFIBUS-DP-Interface -
Attention:
This device is no longer manufactured. The information contained on this page is therefore not current.
Visit SPATZ+H9000 instead.
The SPATZH6000plus high-frequency inverter power source with its 20,000 Hz
clock frequency is the all-purpose, cost-effective alternative to all of the
transistor-controlled power supplies for micro welding and small component welding. With its
rapid reaction speed, the SPATZH6000plus displays high-performance, lasting
welding capability, functioning with just as much precision at 100 A as it does at
9,000 A.
Each welding operation is feedback controlled during the procedure. The control process takes place very quickly based on the 20 kHz inverter frequency. Actual values are compared with target values every 0.025 ms. The output power is adapted during the welding process if targets are not being met. Constant Current Control (CCC), Constant Power Control (CPC) and Constant Voltage Control (CVC) can all be used. At the end of each weld, the SPATZH6000plus checks if the actual welding parameters are keeping within the limits set.
Online programming and analysis are the connecting links between production, quality control and process engineering. The SPATZH6000plus features 3 options:
- SPATZBG02: The handy operating device with graphical display meets the
demand to be used under rough production conditions.
- AutoSPATZAS-01: Further detailed information is available for the
maintenance via notebook and the RS232-interface.
- AutoSPATZAS-32: Integration and crosslinking of welding systems with a line PC by Ethernet with full online functionality
The SPATZH6000plus's timer, power unit and special high-frequency transformer are housed in a compact IP54-protected housing, which weighs a total of 30 kg / 66 lb. The specific advantages of the SPATZH6000plus high-frequency inverter, such as its low weight and high output voltage, allow the easy system integration.
| Technical Data | |
|---|---|
| Type | SPATZH6000plus |
| Number of programs | 63 |
| Welding impulses / program | 16 |
| Control modes | CCC, CPC,CVC |
| Weld parameter monitoring | yes |
| Stepper function | for CCC, CPC, CVC |
| Force schedule | yes |
| Slope up / slope down | yes |
| Signal inputs | current, voltage, force, penetration |
| Output for proportional valve | yes |
| Mains voltage U1 | 3~400 V-500 V 50/60 Hz |
| Max. power Smax | 60 kVA with 400 V |
| Nominal power SN | 33 kVA with 50 % duty, 400 V |
| Welding current range I2 | 100 - 9,000 A with 6 % duty cycle |
| Welding voltage U2N | 10 V DC |
| Interfaces | BG-02, RS-232, MASDAT Ethernet, PROFIBUS-DP |
| Digital inputs | 13 |
| Digital outputs | 8 |
| Cooling water | 4 l/min at 20 °C 1.1 gal(US)/min at 68 °F |
| Type of protection | IP54 |
| Dimensions (H x W x D) | 380 x 430 x 210 mm 15.0 x 16.9 x 8.3 in |
| Weight | 30 kg / 66 lb |
| Colour | light grey / RAL7035 |
| Included in delivery: | -documentation -SPATZBG-02 connecting cable 3m / 118.1 in -SPATZBG-02 connecting cable holder |