|   Deutsch    |   Français 

About Us

Switch cabinet SPATZ+CL-R for robot applications

(For Inverter SPATZ+M400/M600/M900 with air and water cooling)

The SPATZ+CL-R cabinet is for use with a robot gun and weld transformers up to 150 kVA. The extremely compact switch cabinet is equipped with a carrier for the SPATZ+ weld timer and the necessary cable outlets for the cabling of the mains, the gun transformer, sensory and control cables etc. The main switch with earth fault detection (type B: all-current-sensitive) has a handle in the cabinet door.

As a standard the cabinet comes with fan air-cooling for the SPATZ+. The fans are inside a cover plate on the backside of the cabinet. The air inlet is from rear side, air outlet is sideways. The air channel is hermetically sealed from the inner of the cabinet.

The features of the SPATZ+CL-R switch cabinet are:

  • Cabinet dimensions W x H x D: 700 x 400 x 350 mm (27.6 x 15.8 x 13.8 in)
  • Circuit breaker with earth fault detection, handle at the door
  • 24 V DC power supply via external power source, e.g. by robot cabinet
  • Cable entry via cable glands in the rear panel of cabinet:
    - 2 x M40 for mains and transformer
    - 1 x HAN 16B 8-way built in connector for sensory and I/O coupling
  • Double fan cooling, block proved


  • Mains supply for tip dresser and robot with 3-pole line circuit breaker 1 x M25 and 1 x M20 for robot- and tip dresser connector
  • Adapter sockets for different robot cabinets

SPATZ+CL-R with additional equipment:

  • Weld timer
  • PROFINET Fieldbus board SPATZ+FB-NET
  • Connecting cables
  • Adapter socket for ABB robot cabinet